The display of the USB Timing Box can have the following indications:
| Loop# 1 020% < |
| CH# 8 T ████_ |
| Loop# 1 020% < |
| CH# 8 T 04.9V |
|
USB Timing Box when it is in Timing mode and connected via USB to a computer. The moving icon in the top right corner indicates that a Loop is connected.
The bottom right section of the screen will flash between these two screens.
The top screen shows the battery indicator.
The bottom screen shows the USB voltage. A range between 5.0V and 4.5V is good.
|
| Loop# 1 020% < |
| CH# 8 T 19h |
|
USB Timing Box when it is in Timing Mode and on battery power. The "19h" displayed in the bottom right corner indicates the time until zero battery in hours.
|
| Loop# 1 020% < |
| CH# 8 S ████_ |
| Loop# 1 020% < |
| CH# 8 S 04.9V |
|
USB Timing Box when it is in Store&Copy mode and connected via USB to a computer. Store&Copy mode is indicated by an S in the display.
|
| Loop# 2 020% < |
| CH# 8 R ████_ |
| Loop# 2 020% < |
| CH# 8 R 04.9V |
|
USB Timing Box when it is in Repeat mode and connected via USB to a computer. Repeat mode is indicated by an R in the display. In Repeat mode the USB connection allows charging the device but no data communication. The antenna symbol in the bottom left indicates a wireless connection to the receiving device (Loop# 1 on the same Ch#)
|
| Loop# 1 020% < |
| CH# 8 K ████_ |
| Loop# 1 020% < |
| CH# 8 K 04.9V |
|
USB Timing Box when it is in Kiosk Mode and connected via USB to a computer. The K indicates Kiosk Mode.
|