External 4G/LTE Antenna
Robust High Performance Antenna including holding clamp and 2,5m cable.

100% weather proof. Improves reception on 2G/3G/4G networks significantly over the internal decoder antenna.
Can only be used if decoder is equipped with 4G/LTE module and external antenna connector on front panel.

Ubidium Carrying bag
Sturdy bag for transporting Ubidium and accessories. Includes shoulder strap, handle, mesh wall inside, ID window.

Material: Nylon with PVC coating
Size: 39 x 26 x 18 cm

Ubidium Battery Dual Bay Charger
Eksternt oplader med Eurostik til op til 2 Ubidium-batterier.
Inkluderer kalibreringsfunktion.

Andre varianter kan bestilles direkte hos producenten.

Ubidium Battery Multi-Bay Charger
Eksternt oplader med Eurostik til op til 4 Ubidium-batterier.
Inkluderer kalibreringsfunktion.

Andre varianter kan bestilles direkte hos producenten.

High Gain UHF Antenna
High Gain UHF Antenna for special applications including Holder and Clamp.

No cable included.

2m connecting cable for High Gain UHF Antenna
2m Cable for connecting one High Gain UHF Antenna to a Decoder N(90°)-BNC

12m connecting cable for High Gain UHF Antenna
12m Cable for connecting one High Gain UHF Antenna to a Decoder N(90°)-BNC

Heavy Duty Tripod
Stable design for use with High Gain UHF antennas or the Track Box Passive.

Weight: 6.5 kg
Base diameter: ø 950 mm
Height: from 1.24 to 1.94 m
Tube end: ø 35 mm
Max. load capacity: 50 kg
Material: steel

Suitable mounting clamps for the High Gain UHF antennas are included with the antennas.

Instructions for mounting the Track Box Passive can be found here.

RACE RESULT BLE Reader
Portable UHF Reader. Connectes via BLE to the RACE RESULT EventTools App on smartphones and tablets.

Works with all RACE RESULT Passive Transponders

Includes:
- Bluetooth Reader
- USB cable for charging
- Magnetic Mounting Pad
- Spare Battery

RACE RESULT Tag Læser
Til diplomer og registrering, chipfiler mv.

Kan tilsluttes som et keyboard og læser alle RACE RESULT UHF transpondere.

New in version 2:
- increased read range
- no driver installation necessary
- UHF frequency and read power definable in software
- software controllable beeper

Download driver og software her.

12V Battery Booster
Converter for external 12V Battery. Increases external battery run time by a factor of x2. External battery is first fully discharged, before internal battery is used. Compensates voltage drops across cable and connectors. LED status indication. 100% waterproof. Compatible with all 4000/5000 series decoders.

USB Charger
This Adapter can charge Loop Boxes, Management Boxes, and both types of Trackboxes as well as TrackTiming.
You will need a USB A port that supplies at least 2.4A.

Input: 5V; 2.4A
Output: 12V; max 0.75A
Output power: max 9.0W

Note:
This device does not support fast charging of Active Track Boxes.
Only charge one Track Box Passive at a time.

Ekstra Transponder bakke
Til alle aktiv chips

Loop kabel på rulle, 30 meter
Brug kablet og banan plug til at bygge din egen loop-længde

Banan Plug
Brug kablet og banan plug til at bygge din egen loop-længde

125kHz Detector
The detector picks up any electromagnetic field which would activate the active transponders and converts it into an acoustic signal.
For tracking sources of interference in setups or checking storage locations for your active transponders. The detector can be used at an event to monitor active loops, helping to determine their location if laid under the ground, or finding weak spots.

Start/markerings knap
Start/markerings knappen kan forbindes til boksens port og kan starte tidtagningen eller sætte en markering.
Kabel længde: 1,8m

ALGE/TAG Heuer forbindelse kabel
3 meters forbindelses kabel til ALGE og TAG Heuer produkter med 4mm banan stik. Forbind fotoceller, lysbarrier, start porte osv., til feature porten af RACE RESULT boxen.
For eksempelvis til:
Start timing mode, sætte en markering, præcis tidsmåling for sidste/næste transponder.

Standard Impulse Connector Cable
3m cable to connect external devices to our Active devices (e.g. Photo cell, light barrier, start gate, etc.). Connect to Ground to trigger. Special devices which require power output are not supported.