Bib A5 with Transponder (single)
Race number with one integrated transponder
(two timing lines recommended)
Size: 21x14.8cm (A5)
Material: tear-, abrasion- and water-proof Tyvek, 75g/m².
Print: 4C (full color)

Data sheet

No minimum purchase required
plus 35 AUD setup fee

Bib A5 with Transponder (duo)
Race number with two integrated transponders
(one timing line is sufficient)
Size: 21x14.8cm (A5)
Material: tear-, abrasion- and water-proof Tyvek, 75g/m².
Print: 4C (full color)

Data sheet

No minimum purchase required
plus 35 AUD setup fee

Bib Special Size with Transponder (single)
Race number with one integrated transponder
(two timing lines recommended)
Size: 23x20cm
Material: tear-, abrasion- and water-proof Tyvek, 75g/m².
Print: 4C (full color)

Data sheet

No minimum purchase required
plus 35 AUD setup fee

Bib Special Size with Transponder (duo)
Race number with two integrated transponders
(one timing line is sufficient)
Size: 23x20cm
Material: tear-, abrasion- and water-proof Tyvek, 75g/m².
Print: 4C (full color)

Data sheet

No minimum purchase required
plus 35 AUD setup fee

MTB Plate Special Size with Transponder
Chip MTB Number incl. 1 transponder
Size: 10x15cm
Print: 4C (full color)
Material: Polypropylen 234 g/m² (300μm) or 317,5g/m² (400μm)

Data sheet

No minimum purchase required
plus 35 AUD setup fee

MTB Plate A5 with Transponder A5
Chip MTB Number incl. transponder
Size: 21x14.8cm (A5) or 14x15cm (UCI)
Print: 4C (full color)
Material: Polypropylen 234 g/m² (300μm) or 317,5g/m² (400μm)

Data sheet

No minimum purchase required
plus 35 AUD setup fee

MTB Plate Special Size with Transponder
Chip MTB Number incl. transponder
Size: any size, e.g. 23x20cm, max. A4
Print: 4C (full color)
Material: Polypropylen 234 g/m² (300μm) or 317,5g/m² (400μm)


Data sheet

No minimum purchase required
plus 35 AUD setup fee

Seatpost Sticker with Transponder
Sticker for saddle bar with transponder
Format: 297 x 125 mm
Material: waterproof adhesive paper
Print: 4C (full color)

Data sheet

No minimum purchase required
plus 35 AUD setup fee

RACE RESULT Bib Transponder (single)
Transponders with foam spacer. For sticking on the back of the bib.
(two timing lines recommended)

Application Notes

No minimum purchase required
plus 20 AUD setup fee

1000 RACE RESULT A-Z Transponder
Roll of 1000 RACE RESULT Bib Transponders. These do not contain the bib number, but instead a chip code, e.g. P-1 to P-1000. You will need a chip file in the RACE RESULT 12 software!

Please note that we can't guarantee a specific prefix.

Application Notes

1000 RACE RESULT Raw Transponder (single)
For use with the Chip2Go to produce 1000 Bibs with transponder (single)

Application Notes

RACE RESULT Simple Transponder (single)
No minimum purchase required
plus 20 AUD setup fee

Without foam spacer. Not recommended for running events.

3000 Foam Spacers
3000 Foam Spacers on roll
Dimensions 108x28x3mm

RACE RESULT Triathlon Transponder (disposable)
Passive, disposable transponder for triathlons which will be wrapped around the ankle.
Two timing lines recommended.
Custom layout is possible.
Max. 4-digit number range (up to 9999 only).

Data sheet

No minimum purchase required
plus 35 AUD setup fee

RACE RESULT HuTag
Passive UHF Transponder with Neoprene Velcro Strap for Triathlons and mud races.
Can be used multiple times. Only for Ubidium Ground Antenna and RACE RESULT System 4000/5000/5000s series.

No minimum purchase required
plus 35 AUD setup fee

RACE RESULT Baton
RACE RESULT Baton incl. Transponder
Material: PVC
Dimensions: ca. 30 cm, ø 3,5 cm

No minimum purchase required
plus 35 AUD setup fee

Road Bike Plate [reusable]
Passive transponder double-sided laminated

Size: 13,5x7,2cm
Print: 4C, custom design
Material: Tyvek

Minimum purchase 100 pieces
plus 35 AUD setup fee