The RACE RESULT BLE Reader connects to the RACE RESULT EventTools App, it reads RACE RESULT Passive Transponders. The reader is not designed or optimized to be used as a timing device.
The package includes:
- RACE RESULT BLE Reader
- Spare Battery
- Stick-on magnetic pad
- 5V USB Charger
- USB-A <-> USB-C charging cable.
The battery can be slid out to exchange, if the reader is turned on when the battery is removed it will automatically switch back on when a new battery is fitted.
Buttons & LEDs
The reader has 2 buttons, and 3 LEDs along the top edge.
Buttons
Press and hold the small round power button to switch the device on or off.
At this time the button labelled scan is not used for any operation.
LEDs
Power
- Solid Red - Device is charging
- Solid Green - Battery level above 20%
- Blue - Battery level below 20%
- Off - device is switched off
Bluetooth
- Blue - Bluetooth is connected
- Off - No bluetooth connection
Work
- Flashing Blue - Reading transponders
Technical Specifications
Dimensions & Standards |
|
|---|---|
|
Regulatory Conformity and Standards |
EN60950 (safety) CE, RoHS, FCC |
| Operating Temperature | -20°C to 60°C |
| Dimensions | 108mm x 78mm x 18mm |
| Weight | 200g / 7.05oz |
|
Protection Class |
IP65 -dust tight- |
| Drop Resistance | 1.2m |
Battery |
|
| Capacity | 2000mAh |
| Battery Life |
IDLE - 17h @5dBm - 5h30 @10dBm - 5h15 @15dBm - 5h00 @20dBm - 4h45 @30dBm - 3h00 |
UHF |
|
| Power Output | Adjustable 5dBm - 30dBm |
| Antenna |
Circular Polarized 3dBi |
| Frequency | 865-868MHz / 902-928MHz |
| Expected Read Range |
@5dBm - 0.3m @10dBm - 0.5m @15dBm - 1m @20dBm - 2.5m @30dBm - 6.5m |