Bib with Transponder (single)
Race number with one integrated transponder
(two timing lines recommended)
Size: 8.3" x 5.8" or 7-1/2" x 5-7/8"
Material: tear-, abrasion- and water-proof Tyvek, 75g.
Print: 4C (full color)

Data sheet

No minimum purchase required
plus $ 25 setup fee

Bib with Transponder (duo)
Race number with two integrated transponders
(one timing line is sufficient)
Size: 8.3" x 5.8" or 7-1/2" x 5-7/8"
Material: tear-, abrasion- and water-proof Tyvek, 75g.
Print: 4C (full color)

Data sheet

No minimum purchase required
plus $ 25 setup fee

Bib Special Size with Transponder (single)
Race number with one integrated transponder
(two timing lines recommended)
Size: 9"W 8"H
Material: tear-, abrasion- and water-proof Tyvek, 75g.
Print: 4C (full color)

Data sheet

No minimum purchase required
plus $ 25 setup fee

Bib Special Size with Transponder (duo)
Race number with two integrated transponders
(one timing line is sufficient)
Size: 9"W 8"H
Material: tear-, abrasion- and water-proof Tyvek, 75g.
Print: 4C (full color)

Data sheet

No minimum purchase required
plus $ 25 setup fee

RACE RESULT Bib with Transponder (duo)
Race number with two integrated transponders
(one timing line is sufficient)

Size: 8.3" x 5.8" or 7-1/2" x 5-7/8"
Material: tear-, abrasion- and water-proof Tyvek, 75g.
Print: 4C (full color)

Offered only in blocks of a hundred.

MTB Plate tiny with Transponder
Chip MTB Number incl. 1 transponder
Size: 3.9"W 5.9"H
Print: 4C (full color)
Material: Polypropylen 234 g/m² (300μm) or 317,5g/m² (400μm)

This product can only be used in portrait orientation.
Transponders will not work horizontally.

Data sheet

No minimum purchase required
plus $ 25 setup fee

MTB Plate with Transponder
Chip MTB Number incl. transponder
Size: 8.3"W 5.8"H or 5.5"W 5.9"H (UCI)
Print: 4C (full color)
Material: Polypropylen 234 g/m² (300μm) or 317,5g/m² (400μm)

Data sheet

No minimum purchase required
plus $ 25 setup fee

MTB Plate Special Size with Transponder
Chip MTB Number incl. transponder
Size: any size, min, 5.8"W x 4.1"H to max, 11.7"W x 8.2"H
Print: 4C (full color)
Material: Polypropylen 234 g/m² (300μm) or 317,5g/m² (400μm)


Data sheet

No minimum purchase required
plus $ 25 setup fee

Seatpost Sticker with Transponder
Sticker for saddle bar with transponder
Format: 11.69" x 4.92"
Material: waterproof adhesive paper
Print: 4C (full color)

Data sheet

No minimum purchase required
plus $ 25 setup fee

RACE RESULT Bib Transponder (single)
Transponders with foam spacer. For sticking on the back of the bib.
(two timing lines recommended)

Application Notes

No minimum purchase required
plus $ 10 setup fee

1000 RACE RESULT A-Z Transponder
Roll of 1000 RACE RESULT Bib Transponders. These do not contain the bib number, but instead a chip code, e.g. P-1 to P-1000. You will need a chip file in the RACE RESULT 12 software!

Please note that we can't guarantee a specific prefix.

Application Notes

1000 RACE RESULT Raw-Transponder (single)
For use with the Chip2Go to produce 1000 Bibs with transponder (single)

Application Notes

RACE RESULT Simple Transponder (single)
No minimum purchase required
plus $ 10 setup fee

Without foam spacer. Not recommended for running events.

3000 Foam Spacers
3000 Foam Spacers on roll
Dimensions 108x28x3mm

RACE RESULT Triathlon Transponder (disposable)
Passive, disposable transponder for triathlons which will be wrapped around the ankle.
Two timing lines recommended.
Custom layout is possible.
Max. 4-digit number range (up to 9999 only).

Data sheet

No minimum purchase required
plus $ 25 setup fee

RACE RESULT HuTag
Passive UHF Transponder with Neoprene Velcro Strap for Triathlons and mud races.
Can be used multiple times. Only for Ubidium Ground Antenna and RACE RESULT System 4000/5000/5000s series.

No minimum purchase required
plus $ 25 setup fee

RACE RESULT Baton
RACE RESULT Baton incl. Transponder
Material: PVC
Dimensions: ca. 11.8", ø 1.38"

No minimum purchase required
plus $ 25 setup fee